Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 631
Brocade# show isis shortcuts
Configured: 3, Up: 2, Announced: 1
Name To Metric Announce Tunnel
(SPF/Announce) Intf
lsp tomu2 10.4.1.1 10/- No tnl1
lsp tomu3 10.3.1.1 -/- Yes tnl2
lsp toolong 10.20.1.1 10/10 Yes tnl3
toreachmu3
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
607
53-1003031-02
IS-IS shortcuts
5
Syntax: show isis shortcuts [lsp lsp-name]
The optional lsp parameter displays information about IS-IS shortcuts for a specific LSP.
describes the fields shown in this output.
TABLE 103
Output for the show is-is shortcuts command
This field...
Displays
Configured
The number of IS-IS shortcuts configured.
Up
The number of IS-IS shortcuts that are UP.
Announced
The number of IS-IS shortcuts that are advertised.
Name
The name of the IS-IS shortcut. When the name is longer than 11
characters, it wraps to the next line.
To
The LSP endpoint address.
Metric (SPF or Announce)
The metric used in the SPF calculation or the metric used in the
advertisement of the IS adjacency TLV.
The SPF metric can be one of the following:
•
The metric configured at the MPLS LSP configuration level
•
The native IGP metric plus or minus (+ or -) the relative metric
configured with the shortcuts isis command
•
The native IGP metric
•
A dash (-) denotes that the tunnel is not used in SPF calculations.
The Announce metric can be one of the following:
•
10 (the default announce metric)
•
The metric configured with the announce-metric keyword
•
A dash denotes that the tunnel is not used in the IS adjacency TLV
advertisement.
Announce
Indicates whether or not IS-IS shortcuts are advertised:
•
Yes – IS-IS shortcuts are advertised
•
No – IS-IS shortcuts are not advertised.
Tunnel Intf
The tunnel index of the LSP. This is assigned by MPLS whenever an LSP is
created.
Displaying detailed information about IS-IS shortcuts
The show isis shortcuts detail command displays detailed information about IS-IS shortcuts,
including:
•
The system ID and matching To address of the tunnel
•
Configured metric values