Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 531)

Brocade# show mac vpls
Total VPLS mac entries in the table: 2274 (Local: 8, Remote: 2266)
Vlan:Inner-Vlan
VPLS MAC Address L/R Port /Peer Age
==== ============== === ==== ============ ===
3 0000.009b.d419 L 4/2 3 0
504 0000.0000.0067 R Mult. 10.99.42.253 0
504 0000.0033.b24c R Mult. 10.99.42.253 0
504 0000.0073.6185 R 1/1 10.99.42.253 375
504 0000.0000.40cf R Mult. 10.99.42.253 0
504 0000.0019.d7f4 R Mult. 10.99.42.253 0
504 0000.0044.d58b R Mult. 10.99.42.253 0
504 0000.005c.5a3b R Mult. 10.99.42.253 0
504 0000.0044.d696 R Mult. 10.99.42.253 0
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 507
53-1003031-02
Displaying VPLS information
3
To see details for all the ports on which a remote VPLS MAC address has been learned, use the
show mac mpls vpls mac-address command.
To display the VPLS MAC database on the MP for a VPLS instance specified by its VPLS ID, enter the
following command.
Brocade# show mac vpls 1
Total MAC entries for VPLS 1: 10 (Local: 5, Remote: 5)
Vlan:Inner-Vlan
VPLS MAC Address L/R Port /Peer Age
==== ============== === ==== ========= ===
1 0000.0000.1601 R 5/1 10.3.3.3 0
1 0000.0000.1003 L 5/3 2 0
1 0000.0000.1603 R 5/1 10.3.3.3 0
1 0000.0000.1005 L 5/3 2 0
1 0000.0000.1002 L 5/3 2 0
1 0000.0000.1605 R 5/1 10.3.3.3 0
1 0000.0000.1602 R 5/1 10.3.3.3 0
1 0000.0000.1004 L 5/3 2 0
1 0000.0000.1001 L 5/3 2 0
1 0000.0000.1604 R 5/1 10.3.3.3 0
1 0000.0001.0201 L 5/4 100:200 0
To display a specific entry in the VPLS MAC database on the MP, enter the following command.
Brocade# show mac vpls 1 0000.0000.1601
VPLS: 1 MAC: 0000.0000.1601 Age: 0
Remote MAC Port: ethe 5/1 Peer: 10.3.3.3
Trunk slot mask: 00000000
Syntax: show mac vpls [vpls-id [mac-address]]
The vpls-id variable is the ID of a VPLS instance. When the user specifies the VPLS ID, the user can
also specify a particular entry in the VPLS MAC database by adding the optional mac-address
variable.
Table 78 lists the output displayed by the show mac vpls command.