Viewing information for a route distinguisher – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 809
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
785
53-1003031-02
Displaying VPLS auto-discovery information
8
Viewing information for a route distinguisher
Use the show ip bgp l2vpn vpls rd command to view information for a particular route distinguisher.
Brocade# show ip bgp l2vpn vpls rd 10:10
Total number of BGP Routes: 2
Status codes: s suppressed, d damped, h history, * valid, > best, i internal, S
stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network
Next Hop Metric LocPrf Weight Path
*> 10.1.1.1/32 10.0.0.0 0 100 65535 i
*i 10.2.2.2/32 10.0.0.0 0 100 0 i
Syntax: show ip bgp l2vpn vpls rd
TotSent
The number of sequence numbers sent to the neighbor.
ReTrans
The number of sequence numbers that the Brocade device retransmitted
because they were not acknowledged.
UnAckSeq
The current acknowledged sequence number.
IRcvSeq
The initial receive sequence number for the session.
RcvNext
The next sequence number expected from the neighbor.
SendWnd
The size of the send window.
TotalRcv
The number of sequence numbers received from the neighbor.
DupliRcv
The number of duplicate sequence numbers received from the neighbor.
RcvWnd
The size of the receive window.
SendQue
The number of sequence numbers in the send queue.
RcvQue
The number of sequence numbers in the receive queue.
CngstWnd
The number of times the window has changed.
TABLE 149
Output for the show ip bgp l2vpn vpls rd command
This field...
Displays
Total number of BGP Routes
The number of BGP4 routes the Brocade device has installed in the BGP
L2VPN VPLS route table.
Status codes
A list of the characters the display uses to indicate the route’s status. Refer
to
Origin codes
A list of the characters the display uses to indicate the route’s origin. Refer to
777.
Network
The IP address and network mask of the destination network of the route.
Next Hop
The IP address of the next-hop router.
Metric
The cost of the route.
TABLE 148
Output for the show ip bgp l2vpn vpls neighbors command
(Continued)
This field...
Displays...