Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 361)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 337
53-1003031-02
show mpls ldp tunnel
2
Example Brief version
Brocade# show mpls ldp tunnel
Total number of LDP tunnels : 3
Oper Tunnel Outbound
To State Intf Intf
10.100.100.6 UP tnl0 e1/1
10.100.100.8 UP tnl3 e1/1 e1/4
10.100.100.7 UP tnl1 e1/4
Brocade#show mpls ldp tunnel 10.100.100.8
LDP tunnel tnl3, to 10.100.100.8/32
Tunnel index: 3, metric: 0, status: UP
Outgoing interface: e1/1, Next-hop index: 0
Outgoing interface: e1/4, Next-hop index: 1
NOTE
For trunk ports, the display is the primary port name (Trunk id) as shown in sample output above.
Detailed version
Brocade# show mpls ldp tunnel 10.100.100.8
LDP tunnel tnl3, to 10.100.100.8/32
Tunnel index: 3, metric: 0, status: UP
Outgoing interface: e1/1, Next-hop index: 0
Outgoing interface: e1/4, Next-hop index: 1
For the out-interface option, for an ECMP tunnel, the tunnel appears under all ECMP ports that it
uses – note that the outbound interface column shows all ECMP outgoing interfaces as shown
below.
Brocade# show mpls ldp tunnel out-interface e 1/1
Total LDP tunnels on interface: 2
Oper Tunnel Outbound
To State Intf Intf
10.100.100.6 UP tnl0 e1/1
10.100.100.8 UP tnl3 e1/1 e1/4
Brocade# show mpls ldp tunnel out-interface e 1/1 det
LDP tunnel tnl0, to 10.100.100.6/32
Tunnel index: 0, metric: 0, status: UP
status The operational state of the LSP. This field indicates whether the LSP has been
established through LDP signalling and is capable of having packets forwarded through it.
Outgoing interface
The outbound interface for the LSP. The outbound interface displays the egress interface
of the tunnel. When applicable, the egress interface of the tunnel displays a VE interface
specified by the vid variable.
Next-hop index Index of the next hop used for this tunnel.
Outgoing interface The outbound interface for the LSP. The outbound interface displays the egress interface
of the tunnel. When applicable, the egress interface of the tunnel displays a VE interface
specified by the vid variable.
Next-hop index Index of the next hop used for this tunnel.
Output field Description