Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 408)

384 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
rsvp-hello acknowledgements
2
rsvp-hello acknowledgements
The rsvp-hello acknowledgements command configures the RSVP-TE Hello to respond back with
Hello ACKs to neighbors not carrying any RSVP sessions. The configuring for acknowledgements is
at the global MPLS RSVP level.
The [no] format of this command sets it back to the default behavior of not sending ACKs to
neighbors not carrying any RSVP sessions. This erases the configuration line from the global
configuration. All the mpls-interfaces supporting RSVP Hello having ZERO sessions to neighbors do
not send HELLO_ACKs for requests sent to those neighbors (which is the default behavior).
Syntax [no] rsvp-hello acknowledgements
Parameters None.
Command
modes
This command operates in MPLS RSVP Hello global configuration mode.
Usage guidelines By default, RSVP-TE Hello does not send ACKs to neighbors not carrying any RSVP sessions.
History
Release Command history
Multi-Service NetIron Release 05.6.00 This command was introduced.
Related
commands
None.