Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 288)

264 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying the Traffic Engineering database
1
enable
enable-all-interfaces
max-bypasses 25
max-bypasses-per-mp 5
reoptimize-timer 20000
lsp-xc-traps enable
end of MPLS configuration
Syntax: show mpls config brief
Displaying in the detail mode
The user can display all of the MPLS global information and all of the MPLS configuration
information using the show mpls config command.
Brocade# show mpls config
router mpls
policy
admin-group m2 2
traffic-eng isis level-1
no propagate-ttl
retry-limit 22
rsvp
refresh-interval 40
ldp
hello-timeout 12
ka-interval 18
advertise-labels for 5
session 10.30.30.6 key 1 $!dZ@
mpls interfaces
mpls-interface e1/1
ldp-enable
mpls-interface e1/2
ldp-enable
reservable-bandwidth percentage 80
admin-group 2
mpls paths
path mu1_to_mu3
strict 10.1.1.1
strict 10.1.1.2
strict 10.3.3.1
strict 10.3.3.2
path mu1_to_mu2_2
strict 10.5.1.1
strict 10.5.1.2
path mu1_to_mu2_1
strict 10.1.1.1
strict 10.1.1.2
lsp frr1
to 10.4.2.1
cos 6