Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 334)

310 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show configuration/running-config
2
show configuration/running-config
The show configuration and show running-config commands displays specific MPLS
interface configuration information. The outbound-fec filter configuration parameter now records in
the startup or running configuration.It also now displays the name of the prefix-list configured in
the LDP for outbound FEC filtering.
Syntax show configuration
running-config
Parameters None.
Command
modes
This command operates in all modes.
Usage guidelines Example 1: The outbound-fec filter configuration parameter is recorded in the startup or running
configuration.
Example 2: The outbound FEC filter configuration parameter displays in the show mpls config
command.
Command
output
Output field Description
filter-fec list-in Displays the name of the prefix-list configured in the LDP for inbound FEC filtering.
filter-fec list-out Displays the name of the prefix-list configured in the LDP for outbound FEC filtering.
Example
Brocade# show mpls config
ldp
filter-fec list-in in
filter-fec list-out out
session 10.3.3.3 filter-fec list-out3 out
session 10.4.4.4 filter-fec list-out4 out
History
Release Command history
Multi-Service NetIron Release 05.600 The outbound-fec filter configuration parameter is recorded in the startup or
running configuration.
The outbound FEC filter configuration parameter displays in the show mpls
config command.
Related
commands
running-config [interface][ve][lag [detailed/id/name][vlan]