Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 418)

394 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls rsvp interface detail
2
show mpls rsvp interface detail
Use the show mpls rsvp interface detail command to view a details about each configured
interface. This command displays the RSVP control packet statistics on a per interface basis. One
new packet types, Hello, is added in the Multi-Service NetIron Release 05.6.00.
Syntax show mpls rsvp interface detail
Parameters None.
Command
modes
This command operates in all modes.
Usage guidelines The clear mpls rsvp statistics command clears the ‘Since last clear’ column for the Hello newly
added packet type.
Command
output
Field Description
Interface The RSVP-enabled interface and associated trunk (when applicable).
State Whether the interface is up or down.
MD5 Whether RSVP message authentication is enabled on the interface.
RelMsg Whether RSVP reliable messaging is enabled on the interface.
Bundle Whether RSVP bundle messages are enabled on the interface.
SRefresh Whether RSVP summary refresh is enabled on the interface.
Num of OutSegs
Act/Inact/Resv Out segments are traffic connections on the link. These connections may be active or
inactive. ‘Resv’ represents the number of active out segments with a non-zero mean
rate.
Num of Preempts Number of times lower priority ISPs have been preempted on this interface.
The show mpls rsvp interface detail command displays the following information.
Example
Brocade# show mpls rsvp interface detail
Num of OutSegs Num of
Interface State MD5 RelMsg Bundle SRefresh Act/Inact/Resv Preempts/softPrmpt
e1/3 Up OFF ON ON ON 7/0/0 0/0
MPLS TE flooding thresholds in use
Default UP thresholds : 15 30 45 60 75 80 85 90 95 96 97 98 99 100
Default DOWN thresholds : 99 98 97 96 95 90 85 80 75 60 45 30 15
Hello-interval: 15 sec, Hello-tolerance: 5 (Hello Active, Global configuration)
Total Since last clear
PacketType Sent Received Sent Received
Path 58987 20494 97 16
Resv 20486 59041 13 99
PathErr 0 42 0 0
ResvErr 0 1 0 1
PathTear 21 0 10 0
ResvTear 0 0 0 0
ResvConf 0 0 0 0
Bundle 0 0 0 0
Ack 15 0 9 0