beautypg.com

Cos behavior for local vll – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 587

background image

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

563

53-1003031-02

Local VLL

4

1. The internal priority is determined.

2. When Vll-local COS is configured, this value overrides internal priority.

3. The outgoing outer VLAN COS is mapped from internal priority through use of the egress

encoding map by default. The internal priority does not affect the outgoing inner VLAN COS

4. The outgoing outer VLAN COS is preserved when qos pcp encode-policy off is configured

on the outgoing interface.

5. The outgoing inner VLAN COS is the COS in the incoming packet.

Untagged Endpoint 1 (EP1) to Double-Tagged Endpoint 2 (EP2).

1. The internal priority is determined.

2. When Vll-local COS is configured, this value overrides internal priority.

3. The outgoing outer VLAN COS is mapped from internal priority through the use of the

egress encoding map by default. The internal priority does not affect the outgoing inner
VLAN COS.

4. The outgoing outer VLAN COS is zero when qos pcp encode-policy off is configured on the

outgoing interface.

5. The outgoing inner VLAN COS would be zero.

Double-Tagged Endpoint 1 (EP1) to Single-Tagged Endpoint 2 (EP2).

1. The internal priority is determined.

2. When Vll-local COS is configured, its value overrides internal priority.

3. By default, the outgoing VLAN COS is mapped from the internal priority by use of the

egress encoding map.

4. The outgoing VLAN COS is equal to the incoming, inner VLAN COS when qos pcp

encode-policy off is configured on the outgoing interface.

CoS behavior for Local VLL

NOTE

This section assumes that the user understands how QoS works.

Table

94

describes the expected Class of Service (CoS) behavior for VLL packets when Local VLL is

in effect.

TABLE 94

Expected class of service behavior for Local VLL

Local VLL endpoints

Incoming packet

Outgoing packet

Outer VLAN

Inner VLAN

Outer VLAN

Inner VLAN

Dual-tagged to
dual-tagged

X

Y

X’ or X

Y

Single-tagged to
dual-tagged

X

N/A

X’ or X

X