beautypg.com

Bandwidth-ceiling max threshold percentage – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 80

background image

56

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

53-1003031-02

bandwidth-ceiling max threshold percentage

1

bandwidth-ceiling max threshold percentage

This command sets the threshold for any traffic-rate above the maximum bandwidth-ceiling
configured in the table as a percentage.

The [no] function of this command removes the entry.

Syntax

bandwidth-ceiling max threshold percentage threshold percentage

Parameters

max

Any rate above the maximum ceiling configured. By default, the last ceiling is used.

threshold percentage

Threshold percentage per second. 0 - 100%. By default, the last ceiling is used.

NOTE

The first parameter indicates that any rate above the maximum ceiling configured, the second
parameter is the threshold in percentage for those rates.

Command

modes

This command operates in MPLS global adjustment threshold configuration mode.

History

Release

Command history

Multi-Service NetIron Release 05.6.00 The command was introduced.

Related

commands

None.