Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 335)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 311
53-1003031-02
show mpls config
2
show mpls config
The show mpls config command displays all of the user-configured MPLS parameters. The show
mpls config [brief] command and show running-config [brief] command are enhanced to display
the outbound FEC filter configuration parameter.
Syntax show mpls config [brief]
show-running-config [brief]
Parameters brief
The brief option displays brief MPLS configuration information.
Command
modes
This command operates in all modes.
Usage guidelines Use the show mpls config [brief] command or show running-config [brief] command to display the
outbound FEC filter configuration parameter.
Command
output Command output Description
in Displays the name of the prefix-list configured in the LDP for inbound FEC filtering.
out Displays the name of the prefix-list configured in the LDP for outbound FEC filtering.
Example
Brocade# show mpls config
ldp
filter-fec list-in in
filter-fec list-out out
session 10.3.3.3 filter-fec list-out3 out
session 10.4.4.4 filter-fec list-out4 out
History
Release Command history
Multi-Service NetIron Release 05.600 The show mpls config [brief] command and show running-config [brief]
command are enhanced to display the outbound FEC filter configuration
parameter.
Multi-Service NetIron Release 05.500 This command was enhanced to display the label withdrawal delay setting.
Related
commands
show mpls config [[autobw-template template_name][brief][bypass-lsp
bypass_lsp_name]][cspf-group cspf_group_name][dynamic-bypass][interface [ethernet/pos/
tunnel/ve]][lsp lsp_name][path path_name][static-lsp transit][vll vll_name][vll-local
vll_local_name][vpls vpls_name]]