Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 293)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 269
53-1003031-02
Transit LSP statistics
1
BROCADE# show mpls statistics label 2228
In-label In-Port(s) In-Packet Count In-Byte Count Rate(in kbps)
2228 e3/1 - e3/8 0 0 0
e3/9 - e3/16 81688115422 13886979621740 7345166
e3/17 - e3/24 0 0 0
Syntax: show mpls statistics label [interface|in-label]
The interface variable allows the user to limit label statistics displayed to a specified interface.
TABLE 37 show mpls statistics label output descriptions
This field... Displays...
In-label The MPLS label ID.
In-Port(s) The port where the traffic arrives.
In-Packet Count The number of packets meeting the In-label
and In-port criteria.
In-Byte Count The number of bytes meeting the In-label and
In-port criteria.
Rate (in kbps) The average of the previous two polling
periods.
The in-label variable allows the user specify the label value.
Displaying MPLS RSVP session information
Use the show mpls rsvp session transit command to display the packet count, byte count and rate
in bytes per second for respective RSVP sessions. This keyword is valid for displaying the statistics
for all the transit sessions alone. No ingress and egress sessions are shown with the use of this
keyword.
In the example below, at least one interface module that does not support all three statistics.
Brocade# show mpls rsvp session transit statistics
* means statistics collection is not supported on one or more of the line cards
Total Number of such sessions are: 4
To From Packets Bytes Rate-kbps LSPname
10.150.150.10 10.190.190.9 1007 7654903* 53556* test1
10.150.150.10 10.190.190.9 0 0* 0* test22
In the example below, all the interface modules support transit statistics.
Brocade# # show mpls rsvp session transit statistics
* means statistics collection is not supported on one or more of the line cards
Total Number of such sessions are: 4
To From Packets Bytes Rate (kbps) LSPname
10.150.150.10 10.190.190.9 1007 7654903 53556 test1
10.150.150.10 10.190.190.16 626241 56255 485 test2
10.150.150.10 10.190.190.9 65946 35648469 63582 test3
10.150.150.10 10.190.190.9 0 0 0 test4
Syntax: show mpls rsvp session transit [[statistics [wide | include]]