Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 72)

48 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
show mpls lsp [autobw-samples|name lsp_name autobw-sample]
1
show mpls lsp [autobw-samples|name lsp_name autobw-sample]
The show mpls lsp name lsp_name autobw-sample command shows the sample history for all the
auto-bandwidth LSPs. If a specific LSP name is given as parameter, only that LSPs sample history is
displayed.
Syntax show mpls lsp [brief |detail|down [detail|extensive|wide]|extensive|name lsp_name
autobw-sample |up [detail|extensive|wide]|wide]
Parameters autobw-sample
The autobw-sample option or keyword displays the sample history instead of the LSP History.
brief
The brief option displays brief configuration information.
detail
The detail option displays the detailed configuration information.
down
The down option displays the operationally down LSPs specified by the lsp_name variable.
extensive
The extensive option displays the detailed configuration information with history.
name
The name option displays configuration information specified by the lsp_name variable.
up
The up option displays the operationally UP LSPs specified by the detail, extensive, wide
keyword.
wide
The wide option displays the long LSP name.
autobw-sample
The autobw-sample keyword displays the sample history instead of the LSP History.
Command
modes
This command operates in all modes.
Usage guidelines Use this command to show the sample history for all the auto-bandwidth LSPs.
History
Release Command history
Multi-Service NetIron Release 05.6.00 The command was introduced.
Related
commands
None.