beautypg.com

Single homing topology, Configuration considerations – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 776

background image

752

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

53-1003031-02

VRRP/VRRP-E support

7

Single homing topology

FIGURE 89

Single homing topology example

Configuration considerations

Consider the following when using VRRP/VRRP-E with routing over VPLS in a single homing
topology.

In the single homing topology, a cost is connected to a single VPLS peer. Note that the host can
be connected directly or through an access switch

The host can be directly connected to the VPPE/e master or backup

The no ip icmp redirects command must be configured in VRRP cases and in VRRP-E cases
where server vitualization is not enabled.