Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 686)

662 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying BGP or MPLS VPNv4 information
6
The age secs parameter displays only the routes that have been received or updated more recently
than the number of seconds the user specifies.
The as-path-access-list num parameter filters the display using the specified AS-path ACL.
The best parameter displays the routes received from the neighbor that the device selected as the
best routes to their destinations.
The cidr-only option lists only the routes whose network masks do not match their class network
length.
The community option lets the user display routes for a specific community. The user can specify
local-as, no-export, no-advertise, internet, or a private community number. The user can specify the
community number as either two five-digit integer values of up to 1– 65535, separated by a colon
(for example, 12345:6789) or a single long integer value.
The community-access-list num parameter filters the display using the specified community ACL.
The community-filter option lets the user display routes that match a specific community filter.
The community regular-expression regular-expression option filters the display based on a
specified community regular expression.
The local option....
The neighbor ip-addr option displays the number of accepted routes from the specified BGP
neighbor.
The detail option lets the user display more details about the routes. The user can refine the
request by also specifying one of the other display options after the detail keyword.
The next-hop ip-addr option displays the routes for a given next-hop IP address.
The no-best option displays the routes for which none of the routes to a given prefix were selected
as the best route.
The not-installed-best option displays the routes received from the neighbor are the best BGP4
routes to their destinations, but were nonetheless not installed in the IP route table due to the
rib-route-limit (or RTM route table size limit) and always-propagate option to allow the propagating
those best BGP routes.
The prefix-list string parameter filters the display using the specified IP prefix list.
The regular-expression regular-expression option filters the display based on a regular expression.
The route-map map-name parameter filters the display using the specified route map. The software
displays only the routes that match the match statements in the route map. The software
disregards the route map’s set statements.
The summary option displays summary information for the routes.
The unreachable option displays the routes that are unreachable because the device does not
have a valid RIP, OSPF, or static route to the next hop.
For information about the fields in this display, refer to Table 109 on page 641. The fields in this
display also appear in the show ip bgp vpnv4 display.
Displaying the best VPNv4 routes
To display all the VPNv4 routes in the BGP VPNv4 route table for the Brocade device that are the
best routes to their destinations, enter a command such as the following at any level of the CLI.