Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 670)

TABLE 113 BGP VPNv4 route distinguisher entries
This field... Displays...
Total number of BGP Routes The number of routes contained in the BGP4 route table that contain the
specified RD.
Prefix The network address and prefix.
Age The last time an update occurred.
Learned from Peer The IP address of the neighbor that sent this route.
Out-Label MPLS label associated with this device.
MED The route’s metric. When the route does not have a metric, this field is blank.
AS Path The route’s AS path.
Extended Community Extended community attributes associated with this device.
646 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying BGP or MPLS VPNv4 information
6
Displaying VPNv4 neighbor information
To view BGP4 configuration information and statistics for VPNv4 neighbors, enter the following
command.
Brocade# show ip bgp vpnv4 neighbors
Total number of BGP Neighbors: 2
1 IP Address: 10.2.2.2, AS: 1 (IBGP), RouterID: 10.2.2.2, VRF: default
State: ESTABLISHED, Time: 14h47m39s, KeepAliveTime: 60, HoldTime: 180
KeepAliveTimer Expire in 21 seconds, HoldTimer Expire in 141 seconds
UpdateSource: Loopback 1
RefreshCapability: Received
Messages: Open Update KeepAlive Notification Refresh-Req
Sent : 1 40 887 0 0
Received: 1 35 887 0 0
Last Update Time: NLRI Withdraw NLRI Withdraw
Tx: --- --- Rx: --- ---
Last Connection Reset Reason:Unknown
Notification Sent: Unspecified
Notification Received: Unspecified
Neighbor NLRI Negotiation:
Peer Negotiated IPV4 unicast capability
Peer Negotiated VPNv4 unicast capability
Peer configured for IPV4 unicast Routes
Peer configured for VPNv4 unicast Routes
TCP Connection state: ESTABLISHED
TTL check: 0, value: 0, rcvd: 64
Byte Sent: 29202, Received: 28108
Local host: 3.3.3.3, Local Port: 179
Remote host: 2.2.2.2, Remote Port: 8079
ISentSeq: 7683960 SendNext: 7713163 TotUnAck: 0
TotSent: 29203 ReTrans: 0 UnAckSeq: 7713163
IRcvSeq: 256457831 RcvNext: 256485940 SendWnd: 65000
TotalRcv: 28109 DupliRcv: 0 RcvWnd: 65000
SendQue: 0 RcvQue: 0 CngstWnd: 1479
This example shows how to display information for VPNv4 neighbors. None of the other display
options are used; thus, all of the information is displayed for all neighbors. The number in the far
left column indicates the neighbor for which information is displayed. When the user lists
information for multiple neighbors, this number makes the display easier to read.