Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 688)

664 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying BGP or MPLS VPNv4 information
6
Displaying VPNv4 routes with unreachable destinations
To display BGP VPNv4 routes whose destinations are unreachable using any of the paths in the
BGP route table, enter a command such as the following at any level of the CLI.
Brocade(config-bgp-router)# show ip bgp vpnv4 routes unreachable
Searching for matching routes, use ^C to quit...
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Route Distinguisher: 4:1
Prefix Next Hop Metric LocPrf Weight Status
1 10.0.0.0/8 192.168.4.106 100 0 BE
AS_PATH: 65001 4355 701 80
Syntax: show ip bgp vpnv4 routes unreachable
For information about the fields in this display, refer to Table 109 on page 641.
Displaying information for a specific VPNv4 route
To display BGP VPNv4 route information by specifying an IP address within the network, enter a
command such as the following at any level of the CLI.
Brocade# show ip bgp vpnv4 routes 10.8.1.0/24
Route Distinguisher: 4:1
Number of BGP Routes matching display condition : 1
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop Metric LocPrf Weight Status
1 10.8.1.0/24 10.2.2.2 2 100 0 I
AS_PATH:
Route Distinguisher: 5:1
Number of BGP Routes matching display condition : 1
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH S:SUPPRESSED F:FILTERED
Prefix Next Hop Metric LocPrf Weight Status
1 10.8.1.0/24 10.4.4.4 3 100 0 I
AS_PATH:
Syntax: show ip bgp vpnv4 routes ip-addr/prefix [longer-prefixes] | ip-addr
For information about the fields in this display, refer to Table 109 on page 641 and Table 119 .
Displaying VPNv4 route details
Here is an example of the information displayed when the user uses the detail option. In this
example, the information for one route is shown.