Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 834
810
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying 6PE information
9
Notification Sent
Shows an error code corresponding to one of the following errors when the router sends a
Notification message from the neighbor. Some errors have subcodes that clarify the reason
for the error. The subcode messages are listed underneath the error code messages,
wherever applicable.
•
Message Header Error
-
Connection Not Synchronized
-
Bad Message Length
-
Bad Message Type
-
Unspecified
•
Open Message Error
-
Unsupported Version
-
Bad Peer AS
-
Bad BGP Identifier
-
Unsupported Optional Parameter
-
Authentication Failure
-
Unacceptable Hold Time
-
Unspecified
•
Update Message Error
-
Malformed Attribute List
-
Unrecognized Attribute
-
Missing Attribute
-
Attribute Flag Error
-
Attribute Length Error
-
Invalid Origin Attribute
-
Invalid NextHop Attribute
-
Optional Attribute Error
-
Invalid Network Field
-
Malformed AS Path
-
Unspecified
•
Hold Timer Expired
•
Finite State Machine Error
•
Cease or Administrative Reset
•
Unspecified
Notification
Received
Shows an error code corresponding to one of the listed errors in the Notification Sent field
when the router receives a Notification message from the neighbor.
Neighbor NLRI
Negotiation
Shows the state of the router’s NLRI negotiation with the neighbor. The states can be one of
the following:
•
Peer negotiated IPv4 unicast capability
•
Peer negotiated IPv6 unicast capability
•
Peer configured for IPv4 unicast routes
•
Peer configured for IPv6 unicast routes
Neighbor IPv6
MPLS Label
Capability
Negotiation
Shows the state of the router’s IPv6 MPLS label capability negotiation with the neighbor. The
states can be one of the following:
•
Peer negotiated IPv6 MPLS Label capability
•
Peer configured for IPv6 MPLS Label capability
Neighbor AS4
Capability
Negotiation
Shows the state of the router’s AS4 capability negotiation with the neighbor. The states can
be one of the following:
•
Peer negotiated AS4 capability
•
Peer configured for AS4 capability
TABLE 156
Output parameters of the show ip bgp 6pe neighbors command
(Continued)
Field
Description