Displaying mpls fast reroute information, Displaying mpls fast reroute lsp information – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual
Page 283
![background image](/manuals/361646/283/background.png)
Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
259
53-1003031-02
Displaying the Traffic Engineering database
1
Displaying information about IS-IS LSPs with TE extensions
To display information about IS-IS LSPs with TE extensions.
Brocade# show isis database level2 detail
IS-IS Level-2 Link State Database
LSPID LSP Seq Num LSP Checksum LSP Holdtime ATT/P/OL
XMR3.00-00 0x00000644 0x78e3 843 1/0/0
Area Address: 49.0002
NLPID: CC(IP)
Hostname: XMR3
Auth: Len 17 MD5 Digest "c33db90a87b93c80111980dbd59a19ed"
TE Router ID: 15.15.15.15
Metric: 10 IP-Extended 15.15.15.15/32 Up: 0 Subtlv: 0
Metric: 10 IP-Extended 132.0.0.0/24 Up: 0 Subtlv: 0
Metric: 10 IP-Extended 121.0.0.0/24 Up: 0 Subtlv: 0
Metric: 10 IS-Extended PE4.06
Admin Group: 0x00000000
Interface IP Address: 121.0.0.2
Link BW: 1000000 kbits/sec
Reservable BW: 1000000 kbits/sec
Unreserved BW:
[0] 1000000 kbits/sec [1] 1000000 kbits/sec
[2] 1000000 kbits/sec [3] 1000000 kbits/sec
[4] 1000000 kbits/sec [5] 1000000 kbits/sec
[6] 1000000 kbits/sec [7] 1000000 kbits/sec
Metric: 10 IS-Extended XMR4.00
Admin Group: 0x00000000
Interface IP Address: 132.0.0.2
Neighbor IP Address: 132.0.0.1
Link BW: 10000000 kbits/sec
Reservable BW: 10000000 kbits/sec
Unreserved BW:
[0] 10000000 kbits/sec [1] 10000000 kbits/sec
[2] 10000000 kbits/sec [3] 10000000 kbits/sec
[4] 10000000 kbits/sec [5] 10000000 kbits/sec
[6] 10000000 kbits/sec [7] 10000000 kbits/sec
Syntax: show ip ospf database link-state opaque-area
Displaying MPLS Fast Reroute information
The following sections describe how to get information about MPLS Fast Reroute:
•
“Displaying MPLS Fast Reroute LSP information”
•
“Displaying RSVP session information”
The commands used to display MPLS and RSVP information are described elsewhere in this
document. This section describes the display of information about MPLS Fast Reroute.
Displaying MPLS Fast Reroute LSP information
To display MPLS Fast Reroute LSP information for a protected LSP that uses one-to-one (detour)
backup.