Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 810)

786 Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide
53-1003031-02
Displaying VPLS auto-discovery information
8
Viewing information about BGP L2VPN VPLS routes
Use the show ip bgp l2vpn vpls routes command to view information about BGP L2VPN VPLS
routes.
Brocade1# show ip bgp l2vpn vpls routes
Total number of BGP Routes: 4
Status A:AGGREGATE B:BEST b:NOT-INSTALLED-BEST C:CONFED_EBGP D:DAMPED
E:EBGP H:HISTORY I:IBGP L:LOCAL M:MULTIPATH m:NOT-INSTALLED-MULTIPATH
S:SUPPRESSED F:FILTERED s:STALE
Prefix Next Hop Metric LocPrf Weight Status
Route Distinguisher: 10:10
1 10.1.1.1/32 10.0.0.0 0 100 65535 BL
AS_PATH:
2 10.2.2.2/32 10.0.0.0 0 100 0 I
AS_PATH:
Route Distinguisher: 10:20
3 10.1.1.1/32 10.0.0.0 0 100 65535 BL
AS_PATH:
4 10.2.2.2/32 10.0.0.0 0 100 0 I
AS_PATH:
Syntax: show ip bgp l2vpn vpls routes
LocPrf The degree of preference for this route relative to other routes in the local
AS. When the BGP4+ algorithm compares routes on the basis of local
preferences, the route with the higher local preference is chosen. The
preference can have a value from 0 – 4294967295.
Weight The value that this route associates with routes from a specific neighbor. For
example, when the Brocade device receives routes to the same destination
from two BGP4 neighbors, the device prefers the route from the neighbor
with the larger weight.
Path The AS path for the route.
TABLE 149 Output for the show ip bgp l2vpn vpls rd command (Continued)
This field... Displays