beautypg.com

Sample-recording – Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) User Manual

Page 83

background image

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide

59

53-1003031-02

sample-recording

1

sample-recording

This command configures the template to record the sample history.

The [no] function of the command disables the option.

Syntax

[no] sample-recording [enable|disable]

Command

default

sample-recording disable

Parameters

enable

Sets the sample recording for this LSP or autobw-template.

disable

Removes the setting for the sample recording for this LSP or autobw-template.

Command

modes

This command operates in MPLS sub-configuration mode (config-mpls-autobw-template-template1,
config-mpls-lsp-lsp1).

History

Release

Command history

Multi-Service NetIron Release 05.6.00 This command was introduced.

Related

commands

None.