Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 59)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 35
53-1003031-02
RSVP soft preemption
1
3 Dec 19 09:12:41 Route query response for PSB 0x2664b58c dest=16843008
return_code: 1
. . . .
. . . .
. . . .
Show mpls rsvp session ppend
Use the show mpls rsvp session ppend command to view an appended version of the session.
NOTE
Use the show mpls rsvp session extensive command to view the time left to hard preempt.
Syntax: Show mpls rsvp session ppend
Brocade(config-mpls-lsp-high)# show mpls rsvp sess ppend
Codes: DI:Ingress Detour DT:Transit Detour DM:Merged Detour
DE:Egress Detour BI:Ingress Backup BM: Merged Backup BE:Egress Backup
RP:Repaired Session BYI: Bypass Ingress
Total Number of such sessions are: 1
Transit RSVP: 1 session(s)
To From St Style Lbl_In Lbl_Out Out_If LSPname
10.80.80.80 10.40.40.40 Up SE 1024 3 e1/7 1
Show mpls rsvp interface detail
Use the show mpls rsvp interface detail command to view a details about each configured
interface.
Syntax: show mpls rsvp interface detail
Brocade(config-mpls)# show mpls rsvp int
Num of OutSegs Num of
Interface State MD5 RelMsg Bundle SRefresh Act/Inact/Resv Preempts/softPrmpt
e1/1 Up OFF OFF OFF OFF 1/0/1 2/2
e1/2 Up OFF OFF OFF OFF 0/0/0 0/0
e1/10 Dn OFF OFF OFF OFF 0/0/0 0/0
Show mpls interface
Use the show mpls interface command to view a details about a specific interface.
Syntax: show mpls interface interface