Brocade Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide (Supporting R05.6.00) - Manual (Page 259)

Multi-Service IronWare Multiprotocol Label Switch (MPLS) Configuration Guide 235
53-1003031-02
Displaying the Traffic Engineering database
1
To display more detailed information about each node in the TED.
Brocade# show mpls ted database detail
AreaId: 0
NodeID: 10.2.2.2, Type: Router
Type: M/A, To: 10.1.1.3, Local: 10.1.1.2, Remote: 0.0.0.0
Color: 0x00000007
Metric: 1
Max BW: 155000 kbps
Reservable BW: 155000 kbps
Available BW [priority] kbps:
[0] 155000 [1] 155000 [2] 155000 [3] 155000
[4] 155000 [5] 155000 [6] 155000 [7] 155000
NodeID: 10.1.1.1, Type: Router
Type: M/A, To: 10.1.1.3, Local: 10.1.1.1, Remote: 0.0.0.0
Color: 0x00000007
Metric: 1
Max BW: 155000 kbps
Reservable BW: 155000 kbps
Available BW [priority] kbps:
[0] 155000 [1] 155000 [2] 155000 [3] 155000
[4] 155000 [5] 155000 [6] 155000 [7] 155000
Type: M/A, To: 10.1.1.2, Local: 10.1.1.1, Remote: 0.0.0.0
Color: 0x00000007
Metric: 1
Max BW: 155000 kbps
Reservable BW: 155000 kbps
Available BW [priority] kbps:
[0] 155000 [1] 155000 [2] 155000 [3] 155000
[4] 155000 [5] 155000 [6] 155000 [7] 155000
Syntax: show mpls ted database detail
In addition to the information described in Table 18 , the show mpls ted database detail command
gives the following
[link] Type The type of link. The link type can be either P2P or M/A
P2P Indicates this is a point-to-point link.
M/A Indicates the link is a broadcast, multi-access network.
To The ID of the node at the end of this link.
Local The address of the interface used to reach the remote node.
Remote The address of the interface on the remote node that is connected to the local node. For M/A
link types, this is always 0.0.0.0.
Gen The number of times this link information has changed.
TABLE 18 Output from the show mpls ted data command (Continued)
This field... Displays...