Rockwell Automation GMLC Reference Manual - Manual (Page 896)

Publication GMLC-5.2 - November 1999
Appendix
A
Data Parameters and Data Bits
Data Parameters are variables that are used to configure the controller
options. Data Bits are Boolean values (0,1) which further define the
configuration values for the controller by disabling or enabling controller
options.
Displaying Data Parameters
To display Data Parameters in the Tag Window:
1. In the Tag Explorer, under Data Parameters, select either an Axis or
General Parameters (i.e., non-axis-specific data parameters). The data
parameters associated with that selection appear in the Tag Window.
Note: If an axis does not appear, it has not been enabled in the
Configure Control Options dialog box.
2. In the Tag Window, scroll down the list until the desired data parame-
ter appears.
Displaying Data Bits
To display Data Bits in the Tag Window:
1. In the Tag Explorer, under Data Bits, select either an Axis or General
Bits (i.e., non-axis-specific data bits). The data bits associated with
that selection appear in the Tag Window.
Note: If an axis does not appear, it has not been enabled in the
Configure Control Options dialog box.
2. In the Tag Window, scroll down the list until the desired data bit
appears.