Rockwell Automation GMLC Reference Manual - Manual (Page 181)

Publication GMLC-5.2 - November 1999
144 Working with Blocks
5. Click your left mouse button in another area of the Diagram Window
to clear the selection.
Note: You can visually align blocks and connections anywhere in the
Diagram Window. See Moving Blocks and Changing the Position
of the Connection Lines Between Blocks.
Spacing Blocks
Blocks that are evenly spaced are easier to read. When a diagram
becomes cluttered and blocks overlap, it is time to space the blocks so you
can keep track of what you are doing.
To space blocks of an entire diagram appearing in the Diagram Window:
1. From the menu bar, select Edit. The Edit menu appears.
2. Choose Select All. The entire diagram is selected.
3. From the menu bar, select Edit. The Edit menu appears.
4. Select Space Blocks.
5. Click your left mouse button in another area. The diagram selection is
cleared and the blocks are uniformly spaced.