Rockwell Automation GMLC Reference Manual - Manual (Page 41)

Publication GMLC- 5.2 - November 1999
4 Preface
Using the Optional Novice Mode
If you have never used Windows-based software or if you feel that you
need more assistance, we recommend Novice Mode. If you are in Novice
mode, after you complete a dialog box, the next one automatically
appears. Novice Mode also provides added information on some dialog
boxes. A final dialog box informs you that the configuration task is
complete.
In this manual we assume that Novice Mode is not selected. Normally, the
tabs appear at the top for you to select additional dialog boxes. This
convention assumes that after opening the initial dialog box that you:
• Select a tab to open additional dialog boxes.
• Select OK to accept entered values and close each dialog box.
Related Documentation
The following documents contain additional information concerning
related Allen-Bradley products. To obtain a copy, contact your local
Allen-Bradley office or distributor.
For: Read this Document:
Publication
Number:
Information regarding 1394
hardware installation and setup
procedures 1394 Digital, AC, Multi-Axis Motion
Control System User Manual 1394-5.0
Features of the 1394 family 1394 Digital, AC, Multi-Axis Motion
Control System Brochure 1394-1.0
Specifications of 1394 family 1394 Digital, AC, Multi-Axis Motion
Control System Product Data 1394-2.0
Information regarding IMC S Class
Compact hardware installation
and setup procedures IMC-S/23x Compact Motion
Controller Installation and Setup
Manual 4100-999-122