Rockwell Automation GMLC Reference Manual - Manual (Page 73)

Publication GMLC-5.2 - November 1999
36 Configuring Control Options
2. In the Axes area, select the axes you want to enable by clicking on the
checkbox next to the axis name.
You can
select these
axes:
Only when one of the following is selected:
AXIS2 and
AXIS3 • Expansion Card for AXIS2 and AXIS3
option on the General page.
• 1394 GMC/GMC Turbo Control Type
on the General page.
VIRTUAL0
and
VIRTUAL1 AxisLink option on the General page.