Rockwell Automation GMLC Reference Manual - Manual (Page 801)

Publication GMLC-5.2 - November 1999
764 Configuring ControlNet (CNET)
3. Select New. The CNET Output Bit dialog box appears.
4. Make entries in the following fields:
5. Select OK. The dialog box closes, and the new input appears in the
Tag Window.
Defining Output Floats
Output floats can pass user variables and a select list of system variables.
If you have enabled output floats, you must link each floating point output
to a user variable that is the source of the floating-point value. To do this:
1. In the Tag Explorer, select Output Float.
Field Description
Name Type the name of the CNET Output Bit.
Address Type the address, or number, of the bit (from 0
to 39).
Note:
The available address range depends on
the number of Output Bits you specified
in the CNET page of the Configure
Control Options dialog box. See
Defining the I/O Configuration.