Rockwell Automation GMLC Reference Manual - Manual (Page 440)

Publication GMLC-5.2 - November 1999
Equation 403
• Tag Explorer – Select a variable type from the tree control. The
specific variables associated with a the selected variable type appear
in the Tag Window.
Note: If a variable type does not appear, it has not been enabled.
• Tag Window – Select a specific variable or output to hold the
assigned value.
Note: If a particular variable or output does not appear, it has not been
defined.
• = (value) – Enter the value or expression that will be assigned to the
selected variable.
Master/Slave CAM Position types
Use the Master/Slave CAM Position type to assign a value to a Position
Lock Cam Master or Slave Cam position. Make your entries in the
following fields:
Axis – Select an axis.
Note: If an axis does not appear, it has not been enabled.
PCAM Slave Point – If you selected Slave_CAM_position, enter a value
or expression for the PCam Slave Point number, from:·0 to 12,999 for
iCODE version 3.0 or later. Enter a value from 0 to 1,999 for iCODE
versions earlier than 3.0.
PCAM Master Point – If you selected Master_CAM_position, enter a
value or expression for the PCam Master Point number, from:·0 to 12,999
for iCODE version 3.0 or later. Enter a value from 0 to 1,999 for iCODE
versions earlier than 3.0.
= (value) – Enter the value or expression to assign to TCam Master Point.
Master CAM Time type
Select Master CAM type to assign a value to a Time Lock Cam Master
Cam point. Make your entries in the following fields.