Rockwell Automation GMLC Reference Manual - Manual (Page 207)

Publication GMLC-5.2 - November 1999
170 Working With Modules
You can continue to change these two working views of the Diagram
Window. This would enable you to view two widely separated areas of a
large diagram. In addition, you can display different modules in either
view by selecting them from the Diagram Explorer.
To change focus to the lower view, hold the Shift key down while clicking
the left mouse button on a module node in the Diagram Explorer.
Displaying Module Information
To determine the number of blocks and immediate descending modules at
any level:
1. In the Diagram Explorer, select the desired diagram or module level.
2. In the Diagram Window, select the module that you want details
about. The module is highlighted.
3. From the menu bar, select Module. The Module File menu appears.
4. Select Module Info. The dialog box similar to the following appears,
showing the number of blocks and the number of modules in the
selected module level.
Documenting a Module
You can enter information about a module that can be helpful to you and
future users. The remarks you enter stay with the module and are not
diagram specific. The documentation can be accessed for nay diagram
that uses this module.