Rockwell Automation GMLC Reference Manual - Manual (Page 567)

Publication GMLC-5.2 - November 1999
530 Fault Variables
30 Flex I/O Missing or Failed
29 Illegal Path Reference
28 Insufficient Time (Linear Interpolation)
27 Bad Arc (Circular Interpolation)
26 Unknown RIO Device (Scanner)
25 Attempt to Access Unknown AxisLink Device
24 Optional Hardware Missing
23 No Tasks Running
22 Attempt to Access Locked Memory
21 Illegal Direct Command
20 Program Checksum Error
19 Illegal Command While Program Running
18 Illegal Command While in Overtravel
17 Illegal Command with Feedback OFF
16 Illegal Command with Feedback ON
15 Value Out of Range
14 Illegal Data Reference
13 Illegal Axis Configuration
12 Illegal Expression
11 Illegal Action
10 Illegal Numeric Format
9 Illegal Axis Reference
8 Extra Characters in Command
7 Missing { or } in Command
6 Missing ( or ) in Command
Fault
Value
Description