Rockwell Automation GMLC Reference Manual - Manual (Page 193)

Publication GMLC-5.2 - November 1999
156 Working with Diagrams
.
Important: A successful test indicates that the diagram translates to a
valid program, not that the motion controller operates
your machine flawlessly.
Translating a Diagram into Program Script
Before you perform a download, you can translate the diagram to
program script. We strongly suggest that only an experienced programmer
should edit a program.
Important: Changes made to a program are not converted to changes
in the corresponding diagram.
To convert your diagram into a program script: Select Translate to Script
from the Diagram menu option. The program appears in a window
similar to the following:
If there are: Do this:
Errors 1. Correct the error(s).
2. Go to step 1.
No errors. Your test is complete