Rockwell Automation GMLC Reference Manual - Manual (Page 158)

Publication GMLC-5.2 - November 1999
Applying Axis Configuration Changes 121
Use the features of the Apply page as follows:
Controller Icon
The icon in the right-center of the dialog box indicates whether axis
configuration in the controller is the same as in GML Commander. If the
page is white with a blue checkmark above it, as shown below, the axis
configuration in the controller and in GML Commander are the same.
If the page is grayed-out and there is no checkmark, as shown below, the
axis configuration in the controller and in GML Commander are different.
Upload button
If the axis configurations, in the controller and in GML Commander, are
different, select Upload to load the axis configuration from the controller
to GML Commander.
Download button
If the axis configurations in the controller and in GML Commander are
different, select Download to load the axis configuration from GML
Commander to the controller.