Rockwell Automation GMLC Reference Manual - Manual (Page 72)

Publication GMLC-5.2 - November 1999
Setting the Axes 35
4. Place your cursor in the Setups Password field.
5. Select SET. This default password is highlighted.
6. Type your password. SET is replaced with the new password.
Important: To save the new entries, select OK. This saves the
information on all of the pages of the dialog box and closes it.
If you select a different tab, your changes are not saved until
you select OK on any page of the dialog box. If you select
Cancel at any time, all changes that were made are lost.
Setting the Axes
To set axis options:
1. Select the Axes tab. The Axes page appears.
Download
Servo Update
Rate 1. Select this option to change the default
Servo Update rate of 1000 Hertz to a new
rate. Download Servo Update Rate affects
the CPU utilization rate, as well as the
frequency with which the CPU updates its
reading of data, such as general system
variable values, user variables, and I/O
values.
2. Enter a different Servo Update rate (from
250-2000 Hz).
Field Description