Rockwell Automation GMLC Reference Manual - Manual (Page 43)

Publication GMLC- 5.2 - November 1999
6 Preface
Contents of this Manual
Chapter Title Contents
Preface Preface This chapter provides an introduction to GML
Commander. It describes what you need to know about
GML Commander before you build your first diagram. It
includes:
• The different functional segments of GML
Commander.
• What function block palettes are available to make
your diagram easy to build.
• Menus and toolbars.
1 Overview This chapter contains general procedures you use
while creating and editing diagrams.
2 Configuring Control
Options This chapter describes the steps to define the control
options configuration settings. It also contains
additional step-by-step procedures that let you
customize your workspace based on the controller you
are using. It includes information about:
• Remote IO.
• SLC.
• AxisLink.
• DH-485.
• Multidrop.
3 Configuring Your
Axes This chapter contains step-by-step procedures you
use to define the axis configuration settings.
4 Using the
Imaginary Axis This chapter tells how to configure and use an
imaginary axis.
5 Working with
Blocks This chapter covers the physical aspect of blocks, such
as selecting, positioning, and manipulating. .
6 Working with
Diagrams This chapter contains step-by-step procedures you
use to create, test, and document your diagram.
7 Working with
Modules This chapter includes procedures for creating, viewing,
and documenting modules.
8 Working with
Scripts This chapter provides procedures for using the script
editor and translating a diagram to script.