Rockwell Automation 20D PowerFlex 700S Phase II Drive Frames 1...6 Installation Instructions User Manual
Installation instructions, Introduction
Publication 20D-IN024C-EN-P - July 2013
Installation Instructions
PowerFlex 700S Adjustable Frequency Drive - Phase II Control
Frames 1…6
0.75…132 kW (1…200 Hp)
Introduction
This document explains the 5 primary steps for mechanical installation and for
connecting incoming power, the motor, and basic I/O to the PowerFlex® 700S
adjustable frequency AC drive with Phase II control.
The information provided is intended for qualified installers only.
The Additional Resources section on page
is a directory of Rockwell
Automation publications that provide detailed drive information from wiring
and grounding recommendations to troubleshooting and repair.
ATTENTION: This product contains a 3V Lithium battery if the DriveLogix
Controller option board is installed. Perchlorate Material - special handling may
apply.
See