Rockwell Automation GMLC Reference Manual - Manual (Page 82)

Publication GMLC-5.2 - November 1999
Setting the Smart Power Options 45
• An SLC interface
• An AxisLink interface
• A DH-485 interface
• A Multidrop interface
Like the settings you made for a controller’s basic configuration, you set
and modify these additional control options from the Configure Control
Options dialog box.
You can create optional configurations from scratch or by copying from
an existing diagram file with the same or similar configuration
information that you want and modifying it to meet your needs.
To begin configuring optional interfaces for your controller:
1. Select Configure, from the menu bar. The Configure menu appears.
2. Select Control Options. The Configure Control Options dialog box
appears. The example below shows this dialog box before selecting
configuration settings.