Rockwell Automation GMLC Reference Manual - Manual (Page 180)

Publication GMLC-5.2 - November 1999
Making Changes to Your Diagram 143
4. Select Swap Blocks. The blocks switch positions.
Click your left mouse button in another area of the Diagram Window to
clear the selection.
Aligning Blocks
Use the Align Blocks option to align selected blocks on a vertical or a
horizontal grid. The Align Blocks option affects only the blocks and
inclusive connections (including the Start and End blocks) that you select.
To align an entire diagram appearing in the Diagram Window:
1. From the menu bar, select Edit. The Edit menu appears.
2. Choose Select All. All the blocks and connections in the diagram are
highlighted.
3. From the menu bar, select Edit. The Edit menu appears.
4. Select Align Blocks. The selected blocks align.