Rockwell Automation 22-COMM PowerFlex 4-Class DSI (Drive Serial Interface) Network Communication Adapter - Manual

Installation Instructions
PowerFlex 4-Class DSI (Drive Serial Interface)
Network Communication Adapter
This document explains how to install and wire a PowerFlex 4-Class Network
Communication Adapter into a PowerFlex 40 Class or PowerFlex 400 Class drive.
If the adapter is being installed in a DSI External Comms Kit, refer to its Installation
Instructions, publication 22-COMM-IN001 before/when installing the adapter. See
“Related Documentation” for details.
Related Documentation
You can view or download publications at www.literature.rockwellautomation.com .
To order paper copies of technical documentation, contact your local Rockwell
Automation distributor or sales representative.
For information such as firmware updates and answers to drive-related questions, go
to the Drives Service & Support web site at
www.ab.com/support/abdrives and click
on the “Downloads” or “Get help with the new Knowledgebase” link.
!
ATTENTION: Risk of injury or death exists. The PowerFlex 40/400
Class drive may contain high voltages that can cause injury or death.
Remove power from the drive, and then verify power has been discharged
before removing the drive cover.
!
ATTENTION: Risk of equipment damage exists. The Network
Communication Adapter contains ESD (Electrostatic Discharge) sensitive
parts that can be damaged if you do not follow ESD control procedures.
Static control precautions are required when handling the card. If you are
unfamiliar with static control procedures, refer to Guarding Against
Electrostatic Damage, publication 8000-4.5.2.
Document Description
DSI External Comms Kit Installation
Instructions, publication 22COMM-IN001 Instructions to install and wire a PowerFlex 4-Class adapter
in a DSI External Comms Kit.
PowerFlex 4-Class Network
Communication Adapter User Manuals,
publications 22COMM-UM Provides complete installation, wiring, setup, and
communication information for respective PowerFlex
4-Class Network Communication Adapter.
Guarding Against Electrostatic Damage,
publication 8000-4.5.2 Provides static control procedures for protecting
electrostatic discharge sensitive parts.
Wiring and Grounding Guidelines for PWM
AC Drives, publication DRIVES-IN001 Guidelines for proper wiring, grounding, and shielding, and
standard practices for noise protection.
Step 1 Remove power from the drive.
Step 2 Remove the drive cover.