Rockwell Automation GMLC Reference Manual - Manual (Page 79)

Publication GMLC-5.2 - November 1999
42 Configuring Control Options
5.
Setting the Smart Power Options
Select the Smart Power tab to make the necessary data parameter settings
for a Smart Power 1394 system module. If your 1394 controller is not a
Smart Power system module, make no selections on this page.
Note: This page is enabled only if Control Type IMC S-Class 1394/
1394 Turbo is the selected Control Type and iCODE Version 3.7
(or higher) or 1394L is the selected Control Type and iCODE
Version 3.9 (or higher) are selected in the General page of this
dialog box.
If you: Go to:
Do not have more modules to define Step 6.
Have more Flex I/O modules to define Step 1.