H3C Technologies H3C SecPath F1000-E User Manual
Page 937
15
Figure 13 Flow logging 3.0 log report
describe the flow logging 1.0 and 3.0 configuration items respectively.
Table 14 Flow logging 1.0 configuration items
Item Description
Time/Date
Displays the time and date when a flow log was generated.
Protocol Type
Displays the protocol type of a flow log.
Flow Information
Displays flow information:
•
If the protocol type is TCP or UDP, the displayed flow information is source IP
address:source port-->destination IP address:destination port, for example,
1.1.1.2:1026-->1.1.2.10:69.
•
If the protocol type is another type except TCP or UDP, the displayed flow
information is source IP address-->destination IP address, for example,
1.1.1.2-->1.1.2.10.
Start Time
Displays the time when a flow was created.
End Time
Displays the time when a flow was removed.
Flow Action
Displays the operator field of a flow.
•
(1)Normal over: The flow ended normally.
•
(2)Aged for timeout: Timer timed out.
•
(3)Aged for reset or config-change: Flow aging due to configuration change.
•
(4)Aged for no enough resource: Flow aging due to insufficient resource.
•
(5)Aged for no-pat of NAT: One to one NAT. In this case, only the source IP
address, the source IP address after translation and the time fields are available.
•
(6)Active data flow timeout: The life time of the flow reached the limit.
•
(8)Data flow created: Record for the flow when it was created.
•
(254)Other: Other reasons