Configuration guidelines – H3C Technologies H3C SecPath F1000-E User Manual
Page 78
6
Figure 6 Configure Device A as the NTP server of Device B
•
Type 1.0.1.11 in the NTP Server 1 box.
•
Click Apply.
Step3
Verify the configuration
After the above configuration, you can see that the current system time displayed on the System Time
page is the same for Device A and Device B.
Configuration Guidelines
•
A device can act as a server to synchronize the clock of other devices only after its clock has been
synchronized. If the clock of a server has a stratum level higher than or equal to that of a client’s
clock, the client will not synchronize its clock to the server’s.
•
The synchronization process takes a period of time. Therefore, the clock status may be
unsynchronized after your configuration. In this case, you can refresh the page to view the clock
status later on.