H3C Technologies H3C SecPath F1000-E - Manual (Page 179)

4
ICMP message name Type Code
protocol-unreachable 3 2
reassembly-timeout 11 1
source-quench 4 0
source-route-failed 3 5
timestamp-reply 14 0
timestamp-request 13 0
ttl-exceeded 11 0
Configuring a Service Group Resource
Select Resource > Service > Service Group from the navigation tree. All existing service group
resources are displayed, as shown in
Figure 4 . Then, click Add to enter the service group resource
configuration page, as shown in Figure 5 .
Figure 4 Service group resource list
Figure 5 Service group resource configuration page
Table 3 describes the configuration items for configuring a service group resource.