H3C Technologies H3C SecPath F1000-E - Manual (Page 543)

35
• Click Apply.
• Click the icon corresponding to ACL 3000 on the ACL list, and click Add. Perform configuration
on the page shown in Figure 42 .
Figure 42 Configure rules for ACL 3000
• Select Permit from the Operation drop-down list.
• Select 10 af11: Specify AF11 DSCP (001010) from the DSCP drop-down list.
• Click Apply.
# Create ACL 3001, and configure a rule to match packets with the DSCP value AF21.
• Select Firewall > ACL from the navigation tree, and click Add. Perform configuration on the page
shown in Figure 41 .
• Type 3001 as the ACL number.
• Click Apply.
• Click the icon corresponding to ACL 3001 on the ACL list, and click Add. Perform configuration
on the page shown in Figure 42 .
• Select Permit from the Operation drop-down list.
• Select 18 af21: Specify AF21 DSCP (010010) from the DSCP drop-down list.
• Click Apply.
# Create ACL 3002, and configure a rule to match packets with the DSCP value EF.
• Select Firewall > ACL from the navigation tree, and click Add. Perform configuration on the page
shown in Figure 41 .
• Type 3002 as the ACL number.