H3C Technologies H3C SecPath F1000-E - Manual (Page 4)

3
Figure 3 Web-based configuration interface
(1) Navigation area (2) Body area (3) Title area
• Navigation area: Organizes the Web-based NM function menus in the form of a navigation tree,
where you can select function menus as needed. The result is displayed in the body area.
• Body area: The area where you can configure and display a function.
• Title area: On the left, displays the path of the current configuration interface in the navigation area;
on the right, provides the Save button to quickly save the current configuration, the Help button to
display the Web related help information, and the Logout button to log out of the Web interface.
Web User Level
Web user levels, ranging from low to high, are visitor, monitor, configure, and management. A
user with a higher level has all the operating rights of a user with a lower level.
• Visitor: Users of this level can neither access the device data nor configure the device.
• Monitor: Users of this level can only access the device data but cannot configure the device.
• Configure: Users of this level can access data from the device and configure the device, but they
cannot upgrade the host software, add/delete/modify users, or back up/restore the application
file.
• Management: Users of this level can perform any operations for the device.
Introduction to the Web-Based NM Functions
Table 1 describes the Web-based network management functions in detail.
NOTE:
•
Only the SecPath F5000-A5 supports Layer 2 aggregation, Layer 3 aggregation, LACP, session
acceleration, and link load balancing.
• User level in Table 1 indicates that users of this level or users of a higher level can perform the
corresponding operations.