H3C Technologies H3C SecPath F1000-E - Manual (Page 475)

12
Figure 19 Configure static address mapping
• Type 192.168.1.3 as the internal IP address.
• Type 5.5.5.9 as the global IP address.
• Click Apply.
# Configure static NAT for interface GigabitEthernet 0/1.
• In the Interface Static Translation area, click Add. Configure interface static translation as
shown in Figure 20 .
Figure 20 Configure interface static translation
• Select GigabitEthernet0/1.
• Click Apply.
# Configure the internal WINS server.
• Select Firewall > NAT > Internal Server from the navigation tree. Then in the Internal
Server area, click Add. Configure an interval WINS server as shown in
Figure 21 .