H3C Technologies H3C SecPath F1000-E - Manual (Page 381)

13
Table 3 PIM-SM configuration task list
Task Remarks
Globally enable multicast routing
Required
Globally enable multicast routing after selecting Network >
Routing Management > Multicast Routing. For more
information, see Multicast Routing Configuration in the Firewall
Web Configuration Manual.
By default, multicast routing is globally disabled.
Configuring PIM Interfaces
Required
Enable PIM-SM on an interface.
By default, PIM is disabled on an interface.
Configuring Advanced PIM Features
Optional
• Enable the auto-RP function, which is disabled by default.
• Configure the register message checksum and calculation
method.
Displaying PIM Neighbor Information Optional
Configuring PIM-SSM
Perform the tasks in Table 4 to configure PIM-SSM.
Table 4 PIM-SSM configuration task list
Task Remarks
Globally enable multicast routing
Required
Globally enable multicast routing after selecting Network >
Routing Management > Multicast Routing. For more
information, see Multicast Routing Configuration in the Firewall
Web Configuration Manual.
By default, multicast routing is globally disabled.
Configuring PIM Interfaces
Required
Enable PIM-SSM on an interface.
By default, PIM is disabled on an interface.
Configuring Advanced PIM Features
Optional
Configure the SSM group range. By default, the SSM group
range is 232.0.0.0/8.
Displaying PIM Neighbor Information Optional
Configuring PIM Interfaces
After you log into the Web interface, select Network > Routing Management > PIM from the
navigation tree to enter the PIM interface configuration page, as shown in
Figure 8 . Click the icon to
enter the configuration page of the specified PIM interface, as shown in Figure 9 .