H3C Technologies H3C SecPath F1000-E - Manual (Page 384)

16
Return to PIM-SM configuration task list .
Return to PIM-SSM configuration task list .
Displaying PIM Neighbor Information
Select Network > Routing Management > PIM from the navigation tree and click Neighbor
Information to enter the page displaying the PIM neighbor information, as shown in
Figure 11 .
Figure 11 PIM neighbor information
Table 7 describes the detailed PIM neighbor information.
Table 7 PIM neighbor information
Item Description
Interface Name of the interface connecting to a PIM neighbor
Neighbor address IP address of a PIM neighbor
Uptime
Length of time for which the PIM neighbor has been up, where a
“01:02:11:32:18” value means that the neighbor has been up for 1 week, 2 days,
11 hours, 32 minutes, and 18 seconds.
Remaining lifetime
Remaining lifetime of the PIM neighbor, where a "00:02:45” value means that the
neighbor will time out in 2 minutes and 45 seconds and “never” means that the PIM
neighbor never times out.
Return to
PIM-DM configuration task list .
Return to PIM-SM configuration task list .
Return to PIM-SSM configuration task list .
PIM Configuration Example
Network requirements
• As shown in Figure 12 , receivers receive VoD information through multicast. The receiver groups of
different organizations form stub networks, and one or more receiver hosts exist in each stub
network. The entire PIM domain operates in the dense mode.
• Host A and Host C are multicast receivers in two stub networks N1 and N2.
• Device C connects to the network that comprises the multicast source (Source) through
GigabitEthernet 0/0.