H3C Technologies H3C SecPath F1000-E - Manual (Page 924)

2
Figure 1 Syslog
Table 1 describes the syslog configuration items.
Table 1 Syslog configuration items
Item Description
Log Buffer Size Set the number of syslogs that can be stored in the log buffer.
Clear Log To clear the logs in the log buffer, click this button.
Log Host 1
Log Host 2
Log Host 3
Log Host
IP Address
Log Host 4
Set the IPv4/IPv6 addresses, port number and the VPN instance (this option is
available only when you specify a log host with an IPv4 address) of the syslog log
hosts.
The log information can be reported to the specified remote log hosts in the format
of syslog, and you can specify up to four syslog log hosts.