H3C Technologies H3C SecPath F1000-E - Manual (Page 935)

13
Figure 10 Blacklist log configuration page
Table 12 describes the blacklist log configuration items.
Table 12 Blacklist log configuration items
Item Description
Time/Date Displays the time when the blacklist members are generated.
Mode Displays whether the blacklist members are newly added or removed.
Source IP Displays the IP addresses of the blacklist members.
Reason
Displays the reasons why the addresses are added to the blacklist, including manual
add and automatic add:
• Automatic add means that the system automatically adds the source IP address to
the blacklist.
• Manual add means that the blacklist is manually added through Web interface.
Hold Time Displays the hold time of the blacklist members.
Displaying Inter-Zone Policy Logs
Inter-zone logs are logs of the flows matching an inter-zone policy. To record inter-zone policy logs, you
need to enable the Syslog function when configuring an inter-zone policy. For more information about the
detailed configuration, see Inter-Zone Policy Configuration.
Select Log Report > Report > InterZone Policy Log from the navigation tree to enter the page as
shown in Figure 11 .
Figure 11 Inter-zone policy log configuration page
Table 13 describes the inter-zone policy log configuration items.
Table 13 Inter-zone policy log configuration items
Item Description
Start Time Displays the time when the flows are created.